The power button is an essential component of any smartphone, allowing users to turn on and off their device with a simple press. However, what if the power button on your OnePlus 6 suddenly stops working? This article will guide you through simple solutions to turn on your OnePlus 6 without using the power button, ensuring you can still use your device despite the technical hiccup.
Troubleshooting The Power Button Issue On OnePlus 6
If you’re facing difficulties turning on your OnePlus 6 due to a malfunctioning power button, don’t worry, there are a few troubleshooting steps you can try before seeking professional assistance.
Firstly, it’s essential to ensure that the power button is not physically damaged or stuck. Gently press the button a few times and observe if it moves freely or if there is any visible damage. If the button seems fine, proceed with the following steps.
One common cause of power button problems is a drained battery. Connect your OnePlus 6 to a charger using the original cable and charger adapter. After allowing it to charge for a few minutes, try turning on the device. If the battery was entirely depleted, this simple step might solve the power button issue.
Additionally, you can attempt a force restart by holding down the power button and the volume down button simultaneously for about 20 seconds. This can help reset the device and bypass any temporary software glitches causing the power button to malfunction.
If none of these steps resolve the power button issue, it might be necessary to consider alternative methods to turn on your OnePlus 6 without using the power button or seek professional assistance for a possible repair.
Alternative Methods To Turn On OnePlus 6 Without Using The Power Button
If your OnePlus 6 power button is unresponsive or not working, you can still turn on your device using alternative methods. These methods can be helpful in situations where the power button is damaged or not functioning properly.
One option is to connect your OnePlus 6 to a power source using the original charging cable. When the device is connected to power, it automatically boots up, allowing you to access your phone and use it normally.
Another method is to take advantage of the “double-tap to wake” feature available on the OnePlus 6. This feature allows you to wake up your device by simply tapping twice on the screen. To enable this feature, go to Settings > Buttons & Gestures > Quick Gestures, and toggle on the “Double-tap to wake” option. Now, you can turn on your phone by tapping on the screen twice.
By using these alternative methods, you can still operate your OnePlus 6 even if the power button is not functioning properly. However, if these solutions do not work or the issue persists, it is recommended to seek professional assistance for power button repair on your OnePlus 6.
Using The OnePlus 6 Charging Cable To Turn On The Device
If your OnePlus 6 power button isn’t working, you can still turn on the device using the charging cable. Here‚Äôs how:
1. Connect your OnePlus 6 to a power source using the provided charging cable.
2. Make sure the other end of the cable is connected to a functional power outlet or a USB port on your computer.
3. After a few seconds, you should see the OnePlus logo appear on the screen, indicating that the device is powering on.
4. Once the OnePlus logo appears, you can disconnect the charging cable and continue using your OnePlus 6 as usual.
This method works because when you connect your OnePlus 6 to a power source, it triggers the device to turn on automatically. Keep in mind that this is a temporary solution and you should still look into resolving the power button issue.
If this method doesn’t work, proceed to explore the other alternatives mentioned in this article to turn on your OnePlus 6 without the power button.
Utilizing The “double-tap To Wake” Feature On OnePlus 6
The “double-tap to wake” feature on OnePlus 6 can be a life-saver if your power button is not working. With this feature, you can turn on your device without having to rely on the physical power button.
To utilize this feature, follow the steps below:
1. Make sure your OnePlus 6 is in sleep mode or the screen is off.
2. Gently tap twice on the screen with your finger.
3. The device should automatically wake up and display the lock screen.
It’s important to note that this feature needs to be enabled in the settings menu before you can use it. To enable “double-tap to wake,” go to Settings > Buttons & Gestures > Quick Gestures > Enable “Double tap to wake.”
By enabling this feature, you can bypass any issues with the power button and easily turn on your OnePlus 6. However, if the power button problem persists or you encounter other hardware issues, it is advisable to seek professional assistance or contact OnePlus customer support for further guidance.
Restarting The OnePlus 6 In Safe Mode To Address Power Button Problems
Restarting your OnePlus 6 in safe mode can be an effective solution when the power button doesn’t work. Safe mode allows the device to run with only the basic system software, disabling any third-party applications that might be causing conflicts.
To restart your OnePlus 6 in safe mode, follow these steps:
1. Press and hold the power button on your device until you see the power options menu.
2. Tap and hold the “Power Off” option until a prompt appears, asking if you want to reboot in safe mode.
3. Tap “Ok” to confirm and your OnePlus 6 will then restart in safe mode.
Once in safe mode, check if the power button issue persists. If the problem is resolved and the power button works fine, then it’s likely that a third-party app was causing the conflict. You can now restart your device in normal mode and identify the problematic app by uninstalling recently installed apps one by one.
However, if the power button issue persists while in safe mode, there may be a deeper underlying hardware problem. In such cases, it’s best to seek professional assistance to diagnose and repair your OnePlus 6’s power button.
Using ADB Commands To Turn On OnePlus 6 When Power Button Fails
ADB (Android Debug Bridge) commands can be used to turn on the OnePlus 6 when the power button is not working. However, this method requires a computer and some technical knowledge.
To begin, make sure you have ADB installed on your computer. Connect your OnePlus 6 to the computer using a USB cable. Next, open a command prompt on your computer and type “adb devices” to check if your device is successfully connected.
Once your device is recognized, enter the following command: “adb shell input keyevent 26”. This command emulates pressing the power button, thus turning on your OnePlus 6. If successful, your phone should now be powered on and ready for use.
It’s important to note that using ADB commands requires some technical expertise, and any incorrect commands can potentially harm your device. If you are unfamiliar with ADB or uncomfortable with the process, it’s recommended to seek professional assistance or explore alternative methods to turn on your OnePlus 6 without the power button.
Seeking Professional Assistance For Power Button Repair On OnePlus 6
If all the previous solutions fail to turn on your OnePlus 6, it may be time to seek professional assistance for power button repair. Professional technicians have the necessary skills and tools to diagnose and fix hardware issues with your device.
To find a reliable and experienced technician, consider reaching out to the official OnePlus support team or authorized service centers in your area. They will be able to guide you through the repair process and provide you with the best solution for your specific problem.
Before seeking professional help, make sure to back up your data and remove any personal information from the device. This will ensure the safety of your information during the repair process.
Remember, attempting to fix the power button issue yourself may cause further damage to your OnePlus 6. It is always recommended to trust the expertise of professionals when it comes to hardware repairs.
Frequently Asked Questions
FAQ 1: How can I turn on my OnePlus 6 if the power button is not working?
If the power button on your OnePlus 6 is not functioning properly, you can try using the charging cable to turn it on. Connect your device to a power source and wait for a few minutes. The device should automatically power on.
FAQ 2: What if my OnePlus 6 is not turning on even when connected to a power source?
If your OnePlus 6 is still not turning on after being connected to a power source, there might be a deeper issue. Try using a different charging cable and adapter to eliminate any possibilities of charging-related problems. If the problem persists, it is recommended to contact OnePlus support or visit an authorized service center for further assistance.
FAQ 3: Is there an alternative way to turn on my OnePlus 6 without using the power button or charging cable?
Yes, an alternative way to turn on your OnePlus 6 without using the power button or charging cable is by connecting it to a computer via a USB cable. Make sure your computer is turned on and the USB connection is established. Your OnePlus 6 should power on automatically upon establishing the connection.
FAQ 4: What should I do if none of the above solutions work?
If none of the above solutions work to turn on your OnePlus 6, it is advisable to seek professional assistance. Reach out to the OnePlus customer support team or visit an authorized service center to diagnose and fix the issue.
Final Words
In conclusion, when faced with the issue of a non-functioning power button on the OnePlus 6, there are several simple solutions available to still turn on the device. Whether through the use of alternative buttons or features like double-tap to wake, or by utilizing external tools such as a USB cable or computer, users can easily bypass the power button and regain access to their device, ensuring a smooth and uninterrupted smartphone experience.