Have you ever found yourself in a situation where you can’t find the remote control for your Hisense TV, but desperately need to change the input source? Whether it’s because the remote is lost, broken, or simply out of reach, this guide is here to save the day. In this article, we will walk you through a simple and effective method for changing the input on your Hisense TV without using the remote control.
Changing the input source on a TV usually requires the use of a remote control, but this might not always be accessible. However, with a little bit of creativity and patience, you can easily switch inputs on your Hisense TV without the remote. We will cover a method that involves using the buttons on the TV itself, allowing you to navigate through the different input options effortlessly. So, if you’re ready to regain control over your TV’s input source, keep reading for a step-by-step guide on how to do so without a remote.
Using The Side Panel Buttons To Change Input On A Hisense TV
The side panel buttons on a Hisense TV can be incredibly useful when it comes to changing the input without a remote. These buttons are typically located on the right side of the TV, giving you easy access to various functions, including input selection.
To change the input using the side panel buttons, start by locating the “Input” button. It may be labeled as “Source” or “Input Source” depending on your specific model. Press this button, and a menu will appear on the screen.
Using the navigation buttons, scroll through the available input options until you find the one you want. Once you’ve selected the desired input, press the “OK” or “Enter” button to confirm your selection.
Keep in mind that the exact steps may vary slightly depending on your Hisense TV model. Refer to your TV’s user manual for specific instructions if needed.
Using the side panel buttons to change the input on a Hisense TV is a convenient alternative when the remote is not available.
Changing Input On A Hisense TV With The On-Screen Display Menu
Navigating through the On-Screen Display (OSD) menu is another simple and effective method to change the input on a Hisense TV without the remote. Follow these steps to access and utilize the OSD menu:
1. Locate the control buttons on the side panel of your Hisense TV. These buttons are usually situated at the back or near the bottom of the TV.
2. Press the “Menu” button, usually denoted by an image of a gear or two horizontal lines, to open the OSD menu on your Hisense TV.
3. Use the channel up or down buttons to navigate through the menu options until you find the “Input” or “Source” option. Press the volume up or down buttons to enter the selected option.
4. Once you are in the “Input” or “Source” menu, use the channel up or down buttons to browse through the available input sources. Each time you press the volume up or down buttons, the TV will switch to the next or previous input source.
5. Stop when you reach the desired input source, such as HDMI, AV, or Component. Give it a few seconds to change and display the selected input source on your Hisense TV screen.
Using the OSD menu offers a convenient way to switch inputs even without the remote control for your Hisense TV.
Alternative Methods To Change Input On A Hisense TV Without The Remote
If you find yourself without a remote control for your Hisense TV, fret not! There are alternative methods you can use to change the input on your TV without the remote. Here are a few options to consider:
1. Side Panel Buttons: Most Hisense TVs come with side panel buttons that allow you to navigate through the settings and change the input. Look for buttons labeled “Input” or “Source” on the side of your TV. Press the corresponding button repeatedly until you find the correct input source.
2. HDMI CEC: If your Hisense TV supports HDMI Consumer Electronics Control (CEC), you can use a compatible HDMI-CEC enabled device, such as a Blu-ray player or game console, to change the input. Simply switch on the device connected to the desired input, and your TV should automatically detect the input change.
3. Mobile Apps: Some Hisense TVs offer a dedicated mobile app that allows you to control your TV without a remote. Download the official Hisense app on your smartphone or tablet and connect it to your TV. You can use the app’s virtual remote control to change the input easily.
Remember, the availability of these alternative methods may vary depending on your specific Hisense TV model, so consult your user manual or manufacturer’s website for more information.
Using A Universal Remote To Change Input On A Hisense TV
A universal remote can be a great solution if you don’t have the original remote for your Hisense TV. With a universal remote, you can easily control various devices, including your TV. Follow these simple steps to change the input on your Hisense TV using a universal remote:
1. Set up the universal remote: First, you need to program the universal remote to work with your Hisense TV. Refer to the user manual that comes with the remote to find the correct programming instructions.
2. Find the input button: Once the remote is programmed, locate the input button on the remote. This button is typically labeled as “Input” or “Source.” It allows you to navigate through the different input options on your TV.
3. Select the desired input: Press the input button on the universal remote and use the arrow keys to scroll through the available input options. Be patient as it may take a few seconds for the TV to respond and switch to the selected input.
4. Confirm the input change: Once you’ve selected the desired input, press the “OK” or “Enter” button on the universal remote to confirm the input change. Your Hisense TV should now be displaying the content from the selected input source.
Using a universal remote provides a convenient way to change the input on your Hisense TV without the original remote. Make sure to keep the universal remote in a safe place to avoid any future difficulties in accessing your TV’s different input options.
Troubleshooting Tips: Resolving Issues With Changing Input On A Hisense TV
If you’re experiencing difficulties changing the input on your Hisense TV without the remote, don’t worry. This section will provide you with some troubleshooting tips to help you resolve any issues you may encounter.
1. Check the Side Panel Buttons: Ensure that the side panel buttons on your Hisense TV are functioning properly. Sometimes, these buttons may become unresponsive or sticky due to dust or dirt. Clean the buttons with a soft cloth and check if they are working correctly.
2. Power Cycle the TV: Turn off your Hisense TV and unplug it from the power source. Wait for a few minutes before plugging it back in and turning it on. This power cycle can often resolve minor software glitches that may be affecting the input change function.
3. Factory Reset: If the previous steps didn’t work, consider performing a factory reset on your Hisense TV. Keep in mind that this will erase all your settings, so make sure to back up any important data beforehand. Consult your TV’s user manual or the Hisense website for detailed instructions on how to perform a factory reset.
4. Contact Customer Support: If none of the above steps work, it might be best to reach out to Hisense customer support for further assistance. They can provide you with specific troubleshooting steps based on your TV model and help resolve any hardware or software issues.
By following these troubleshooting tips, you should be able to overcome any obstacles you may face when trying to change the input on your Hisense TV without the remote.
Final Thoughts: Exploring Various Options To Change Input On A Hisense TV Without The Remote
In this final section, we will delve into the various options available to change input on your Hisense TV without the remote. While the previous sections focused on specific methods, it’s important to explore alternative options for those situations where none of the usual methods are possible.
One option is to use a smartphone or tablet as a virtual remote. Many Hisense TVs have mobile apps that allow you to control the TV’s functionalities remotely. Simply download the appropriate app, connect it to your TV, and access the input settings through the app.
If you don’t own a smartphone or prefer a more hands-on approach, another solution is to use an HDMI switch. An HDMI switch acts as a hub for multiple devices, allowing you to change inputs manually. Connect all your devices to the switch, and then connect the switch to your TV. This way, you can easily switch between inputs by using the physical buttons on the switch itself.
Lastly, consider purchasing a universal remote control. Universal remotes are designed to work with various TV brands, including Hisense. Syncing the universal remote with your Hisense TV will allow you to change inputs just like you would with the original remote.
Remember, while not having the remote may feel inconvenient, there are always alternative methods to change the input on your Hisense TV.
FAQ
Below are 5 frequently asked questions about changing the input on a Hisense TV without the remote:
1. Can I change the input on a Hisense TV without using the remote?
Answer: Yes, it is possible to change the input on a Hisense TV without the remote by using the buttons on the TV itself.
2. How do I change the input on my Hisense TV without the remote?
Answer: To change the input on your Hisense TV without the remote, locate the buttons or joystick on the TV and navigate to the input or source selection option. Use the buttons to select the desired input source.
3. What if my Hisense TV doesn’t have buttons for input selection?
Answer: If your Hisense TV doesn’t have physical buttons for input selection, you can try using the “Menu” button to access the settings menu, then navigate to the input options using the arrow or navigation buttons on the TV. Select the desired input source from the menu.
4. Is there a universal remote that can change the input on a Hisense TV?
Answer: Yes, there are universal remotes available in the market that can be programmed to work with Hisense TVs. Look for a universal remote that supports your Hisense TV model and follow the instructions for programming it to change the input.
5. Can I use a smartphone app to change the input on my Hisense TV without the remote?
Answer: Yes, many TV remote control apps for smartphones have a feature that allows you to control the TV’s input selection. Download a compatible app for your Hisense TV, connect your smartphone to your TV, and use the app’s interface to change the input source.
Verdict
In conclusion, changing the input on a Hisense TV without the remote is a simple process that can be done with just a few steps. By turning on the TV and accessing the menu options through the on-screen display, users can navigate to the input settings and select a desired input source. This guide provides useful information on the different ways to change the input on a Hisense TV without the need for a remote control.
It is worth noting that having a remote control for your Hisense TV can make the process of changing inputs much more convenient and quick. However, in situations where the remote is misplaced or not available, the alternative methods described in this article are effective solutions. With a basic understanding of how to navigate the menu and input settings, users can easily change the input on their Hisense TV, ensuring a seamless viewing experience.