Are you frustrated because your AirPods won’t go into pairing mode? You’re not alone! Many Apple device users have encountered this issue, and it’s more common than you think. In this article, we’ll explore the possible reasons why your AirPods won’t pair and provide you with solutions to get them working again.
Understanding AirPods Pairing Mode
Before we dive into the troubleshooting process, let’s quickly understand how AirPods pairing mode works. When you open the AirPods charging case, a small light on the front of the case starts flashing white. This indicates that your AirPods are in pairing mode, ready to connect to your iPhone, iPad, or other Apple devices.
However, sometimes this pairing process gets stuck, and the light doesn’t flash, or the AirPods don’t appear in your device’s Bluetooth settings. This is when you know something is wrong, and your AirPods won’t go into pairing mode.
Possible Reasons Why Your AirPods Won’t Go Into Pairing Mode
There are several reasons why your AirPods might refuse to enter pairing mode. Here are some of the most common culprits:
I) Dead Or Low Battery
One of the most obvious reasons your AirPods won’t pair is because of a dead or low battery. If your AirPods are completely drained, they won’t be able to enter pairing mode. Try putting them back in their charging case and letting them charge for at least 30 minutes before attempting to pair them again.
Make sure your charging case is also charged! A dead charging case won’t be able to charge your AirPods, which means they won’t be able to enter pairing mode.
Ii) Faulty Charging Case
A faulty charging case can also prevent your AirPods from entering pairing mode. If your charging case is damaged or malfunctioning, it won’t be able to provide the necessary power to your AirPods, making pairing impossible.
Try cleaning the charging case and the AirPods’ contacts to ensure there’s no dirt or debris blocking the connection.
Iii) Water Damage
Water damage is another common reason why AirPods won’t pair. If your AirPods or charging case have been exposed to water, it can cause corrosion and damage to the internal components, preventing them from functioning properly.
Be cautious when using your AirPods near water or in humid environments. If you suspect water damage, try drying out your AirPods and charging case before attempting to pair them again.
Iv) Software Issues
Software glitches and bugs can also cause pairing issues with your AirPods. Sometimes, a simple restart of your iPhone or iPad can resolve the problem, while other times, a more comprehensive solution is required.
Try resetting your AirPods by placing them in their charging case, opening the lid, and holding the button on the back of the case for 10 seconds. This will reset your AirPods and may resolve any software-related issues.
V) Interference From Other Devices
Interference from other devices can also prevent your AirPods from entering pairing mode. Other Bluetooth devices, Wi-Fi routers, and even microwaves can cause interference, making it difficult for your AirPods to connect to your device.
Try moving your AirPods and charging case away from other devices and see if that resolves the issue.
Troubleshooting Steps To Get Your AirPods Into Pairing Mode
Now that we’ve covered some of the most common reasons why your AirPods won’t pair, let’s go through some troubleshooting steps to get them working again:
I) Restart Your AirPods And Device
Sometimes, a simple restart can resolve the issue. Try restarting your AirPods by placing them in their charging case, closing the lid, and waiting for 10 seconds. Then, open the lid and try pairing them again. Do the same with your iPhone or iPad by restarting it.
Ii) Forget Device And Re-Pair
If restarting doesn’t work, try forgetting the device on your iPhone or iPad and re-pairing your AirPods. To do this, go to Settings > Bluetooth, find your AirPods, and tap the “i” icon next to them. Tap “Forget Device” and then try pairing your AirPods again.
Iii) Reset Network Settings
If forgetting the device doesn’t work, try resetting your network settings on your iPhone or iPad. To do this, go to Settings > General > Reset and tap “Reset Network Settings.” This will reset your network settings to their default values, which may resolve any connectivity issues.
Iv) Check For Debris And Clean The Charging Case And AirPods
Make sure there’s no debris or dirt blocking the connection between your AirPods and charging case. Try cleaning the charging case and AirPods with a soft cloth and inspect them for any damage or corrosion.
V) Contact Apple Support
If none of the above steps work, it’s time to contact Apple Support. They may be able to help you diagnose the issue or repair/replace your AirPods if they’re still under warranty.
Conclusion
Getting your AirPods to pair can be a frustrating experience, but by following these troubleshooting steps, you should be able to resolve the issue and get your AirPods working again. Remember to always keep your AirPods and charging case clean, dry, and free from debris to prevent pairing issues. If you’ve tried everything and your AirPods still won’t pair, it may be time to consider contacting Apple Support for further assistance.
| Reason | Solution |
|---|---|
| Dead or Low Battery | Charge the AirPods and charging case for at least 30 minutes |
| Faulty Charging Case | Clean the charging case and AirPods’ contacts, or replace the charging case if damaged |
By following these steps and understanding the possible reasons why your AirPods won’t pair, you’ll be able to enjoy seamless music streaming, phone calls, and podcast listening again. Happy troubleshooting!
Why Won’t My AirPods Go Into Pairing Mode?
AirPods may fail to enter pairing mode due to various reasons, including a low battery, faulty charging case, incorrect settings, or software issues. If your AirPods are not entering pairing mode, try resetting them, checking for any debris or dirt in the charging case, and ensuring that your device’s Bluetooth is enabled.
Additionally, make sure that your AirPods are not already connected to another device. If you’ve previously paired your AirPods with another device, they might not be able to pair with a new device until you disconnect them from the previous one. Try forgetting the device on your AirPods and then try pairing them again.
How Do I Reset My AirPods?
To reset your AirPods, go to the charging case and open the lid. On your iOS device, go to Settings > Bluetooth, find your AirPods, and tap the “i” icon next to them. Tap “Forget Device” and then confirm. Next, go back to the charging case and press and hold the setup button on the back of the case until the status light flashes white.
Once you’ve reset your AirPods, you can try pairing them again with your device. Make sure that your device’s Bluetooth is enabled, then open the charging case, and your AirPods should enter pairing mode. Follow the on-screen instructions to complete the pairing process. If you’re still having trouble, try restarting your device or contacting Apple support for further assistance.
Why Are My AirPods Not Connecting To My Device?
There are several reasons why your AirPods may not be connecting to your device. One common issue is that the AirPods are not charged or the charging case is not functioning properly. Try charging your AirPods and making sure that the charging case is properly closed.
Another reason could be that your device’s Bluetooth is not enabled or is interfering with other devices. Try restarting your device, ensuring that Bluetooth is enabled, and then try pairing your AirPods again. If the issue persists, try resetting your AirPods and then pairing them again. If none of these solutions work, you may want to contact Apple support for further assistance.
Can I Pair My AirPods With Multiple Devices?
Yes, you can pair your AirPods with multiple devices, but you can only connect them to one device at a time. To pair your AirPods with a new device, simply place them in the charging case, open the lid, and follow the on-screen instructions to pair them with the new device.
When you pair your AirPods with a new device, they will automatically disconnect from the previous device. This means that you’ll need to reconnect them to the previous device if you want to use them with it again. Additionally, keep in mind that pairing your AirPods with multiple devices can sometimes cause connectivity issues, so you may need to reset your AirPods or restart your devices to resolve any problems.
How Do I Check The Battery Level Of My AirPods?
You can check the battery level of your AirPods on your iOS device by going to Settings > Bluetooth and finding your AirPods in the list of devices. Next to your AirPods, you’ll see a battery level indicator that shows the current charge level.
Alternatively, you can also check the battery level of your AirPods on the charging case. When you open the charging case, the status light on the front of the case will flash green if the case has more than 50% charge, amber if it has between 20% and 50% charge, and red if it has less than 20% charge.
Can I Use My AirPods With Non-Apple Devices?
Yes, you can use your AirPods with non-Apple devices, such as Android phones or tablets. To pair your AirPods with a non-Apple device, go to the device’s Bluetooth settings and search for available devices. Select your AirPods from the list, and follow the on-screen instructions to complete the pairing process.
Keep in mind that some features, such as Siri functionality and automatic ear detection, may not work on non-Apple devices. Additionally, you may experience connectivity issues or delays when using your AirPods with non-Apple devices. However, basic audio playback and phone call functionality should work as expected.
What If I’ve Tried Everything And My AirPods Still Won’t Pair?
If you’ve tried all of the above troubleshooting steps and your AirPods still won’t pair, it’s possible that there’s a hardware issue with your AirPods or charging case. In this case, you may want to contact Apple support for further assistance or visit an Apple Store for repair or replacement options.
Additionally, you can also try resetting your device’s network settings or reinstalling the operating system to resolve any software-related issues. If none of these solutions work, it’s possible that there’s a problem with your device’s Bluetooth functionality, in which case you may need to contact the manufacturer for support.